If a faster turnaround of instruments is what you need but you’re not quite ready for a bigger or additional cleaning machine, ordering another tray could solve your problem.
Our trays are instrumental in washing, rinsing, and air purging instruments in one cycle. This promotes safer practices by allowing multiple decontamination stages to be performed with less handling of the instrument by the operator. It also promotes longer instrument life by saving the instrument from the operator. These trays also allow the operator to keep the entire set of instruments together by placing the hand or flat instruments in the tray first, then connecting the lumen instruments.
The Triton Series Trays
Trays for every robotic series
Every Triton tray can process up to 10 robotic or lumen instruments.
With our custom adapters and Robotic Arm Cleaning System trays (RACS), every robotic instrument can be processed.
Floor Model Cleaning Systems Trays
Our Robotic Arm Cleaning System tray (RACS) and custom adapters will process all Si and Single-Site robotics.
Image is of a RACS tray with Si robotic instruments.
Image is of a standard tray for processing lumen and nonlumen instruments.
Automatic Tabletop Systems Trays
Model 1101 RACS tray with Si robotic instruments.
Model 1100 tray showing instrument organizers and manifold ports.
The benefit of keeping the set together means that after the decontamination process is finished, the entire set goes to the clean side of the department to be sterilized at the same time. With our competitors, only the lumen instruments get cleaned in the machine, so the flat instruments get to the clean side first. When that happens, the staff has to wait on the lumens that go in the set to finish being decontaminated.